The ChocoLED brand is the future of tanning, dreamed and created by Chocolate Brown ChocoTubes.

The LED tanning unit is a separate UV-A (ultraviolet “A” components) and UV-B (ultraviolet “B” component) LED (Light Emitting Diode) SMD (Surface Mount Device) construction, supplemented with special (up to two different colors) light therapy LEDs.

Unlike the tanning tubes and facial tanners, we have developed the LEDs to the optimum of the melanogenesis (UV-B) and immediate tanning (UV-A) weighting functions specified in the DIN 5031 optical standard, achieving a level of tanning never before reached with lower ultraviolet radiation exposure.

In terms of tanning, radiation in other spectra (e.g., visible or infrared) can be partially or completely eliminated, as ultraviolet radiation has been optimized for skin tanning.

Compared to the Chocotube, the ChocoLED results in outstandingly effective facial and body tanning

The Hybrid tanning bed is a tanning machine where, in addition to traditional tanning tubes, modern UV-emitting LEDs also tan the skin. This typically refers to LED facial tanning in horizontal machines, where high-pressure facial tanners or spaghetti tubes are usually used. The Hybrid tanning bed was created by combining these two entirely different technologies.

Compared to traditional Chocotubes, ChocoLED results in a more durable, noticeable, and darker tan!

ChocoLED is not hot, does not provide a burning sensation, and does not scorch the skin like traditional high-pressure facial tanners, as the skin does not tan from heat.

ChocoLED does not emit intense light, and it does not radiate in the infrared or UV-C range, or other wavelengths that are useless for tanning, like a high-pressure facial tanner.

The UV radiation (which tans the skin) is not felt as heat and is not visible as light.Strong light, heat (infrared), and UV-C radiation from high-pressure facial tanners are all unnecessary side radiations for tanning; these are simply byproducts of traditional tanning tubes and high-pressure facial tanners.

Thanks to modern technology, UV LEDs emit minimal unnecessary side radiation compared to Chocotubes.

The spectrographic radiation pattern of ChocoLED cannot be compared to the spectrum of traditional tanning tubes and facial tanners.

According to accredited measurements by the National Institute of Radiation Biology and Radiological Health, ChocoLED facial tanners emit significantly reduced (almost negligible) infrared (750nm-1mm) electromagnetic radiation compared to traditional high-pressure facial tanners.

While using ChocoLED, there is no burning or scorching heat on the facial skin, which is typically felt with traditional high-pressure facial tanners, and no UV-C radiation is generated.

It is recommended for all tanning bed users, especially for those who “slip” in horizontal tanning beds, or for those who turn off the facial tanner during tanning or cover their face to reduce the significant heat associated with infrared radiation.

It is also ideal for those who want to enjoy the pleasant experience of light therapy directly on their face while tanning.

ChocoLED tanning units primarily emit radiation in the ultraviolet range, which is responsible for tanning. Compared to traditional high-pressure facial tanners, their infrared electromagnetic and other secondary radiation is negligible, as confirmed by accredited measurements from the National Institute of Radiation Biology and Radiological Health. Their environmental impact is significantly more favorable due to the considerable difference in electricity consumption. The lifespan of LED emitters can be up to 15-20 times longer compared to tanning tubes and facial tanners, and the amount and hazardous nature of dangerous waste generated during operation is also significantly more favorable.

In horizontal tanning beds, the use of light therapy tanning tubes on the face is not effective due to the facial tanner, which is an area especially important for stimulating collagen production.

ChocoLED high-performance light therapy LEDs are positioned directly in front of the face, so their effect is directly noticeable on the facial skin.

ChocoLED panels may even feature two different types of light therapy LEDs.

The RED light (655-670 nanometers) radiation range can promote collagen production, while the BLUE light (465-475 nanometers) radiation range can vitalize the skin. According to the German DIN 5031 standard, this radiation triggers the photoisomerization of bilirubin, meaning it can help with the breakdown of bilirubin in the blood.

Tanning with any tanning equipment, including LED tanning beds, should only be done according to the frequency and time limits prescribed for your skin type. The specific details are provided in the Usage Rules chart located inside the tanning cabin. The recommended exposure program (tanning schedule) can follow the guidelines of the EN 60335-2-27 standard.

With any tanning equipment, including ChocoLED tanning panels, you should only tan for the time appropriate for your skin type.

The specific details are provided in the Usage Rules chart located inside the tanning cabin.

The recommended exposure program (tanning schedule) can follow the guidelines of the EN 60335-2-27 standard.

Just like with traditional tanning beds.

WARNING!

Ultraviolet (UV) radiation can cause eye injuries and skin damage, such as premature skin aging and possibly the development of skin cancer.

1. Read the instructions carefully. For further information, please contact the staff.
2. Always wear protective eyewear!
3. Certain medications and cosmetics can increase sensitivity. Excessive tanning is unhealthy, and sunburn is harmful, so always avoid it.

The recommended exposure program (tanning schedule) follows the EN 60335-2-27 standard.*

I. Skin type • II. Skin type • III. Skin type • IV. Skin type

Session 1: 2 minutes • 2 minutes • 2 minutes • 2 minutes
Session 2: 2 minutes • 3 minutes • 4 minutes • 4 minutes
Session 3: 3 minutes • 4 minutes • 5 minutes  • 6 minutes
Session 4: 3 minutes • 5 minutes • 7 minutes • 8 minutes
Session 5: 3 minutes • 6 minutes • 8 minutes • 10 minutes
Session 6: 4 minutes • 7 minutes • 10 minutes • 12 minutes
Session 7: 4 minutes • 8 minutes • 11 minutes • 14 minutes
Session 8: 4 minutes • 10 minutes • 13 minutes • 17 minutes
Session 9: 5 minutes • 11 minutes • 15 minutes • 19 minutes
Session 10: 5 minutes • 12 minutes • 16 minutes • 21 minutes
Session 11: 5 minutes • 13 minutes • 18 minutes • 23 minutes
Session 12: and after 5 minutes • 14 minutes • 19 minutes • 25 minutes

The total tanning program dose should not exceed 3 kJ/m².

At least 48 hours must pass between the first and second sessions.

The starting dose for Skin Type II should not exceed 100 J/m².

The single-dose exposure should not exceed 600 J/m².
The total exposure time for the year, based on NMSC (Non-Melanoma Skin Cancer), is 992 minutes (maximum 25 kJ/m²).

The table above contains the recommended maximum times and is for informational purposes only!

Please note that every tanner has individual characteristics.

Always consult the staff for advice on the time selection. To avoid unhealthy levels of tanning, the staff may determine the tanning time according to the EN 60335-2-27 standard. Excessive tanning and sunburn have harmful effects on the skin.

SAFETY INSTRUCTIONS FOR TANNING BED USERS

Persons who should not use the tanning bed include those who:

1. Are under 18 years old;
2. Are prone to freckles, naturally have red hair, have abnormally discolored moles on their skin, or have 16 or more moles of 2 mm or greater in diameter on their body;
3. Have atypical (irregularly shaped, greater than 5 mm in diameter, multicolored, irregularly bordered) moles. – In uncertain cases, seek medical advice!;
4. Cannot tan at all, or cannot tan without getting sunburned, or suffer from sunburn;
5. Burn easily in the sun or have had multiple severe sunburns in childhood;
6. Have or have previously had skin cancer, or are predisposed to skin cancer;
7. Have a direct relative who suffers from melanoma;
8. Suffer from light-sensitive diseases or take photosensitizing medications.

Safety Instructions

1. If skin redness occurs several hours after UV treatment, further sessions should be stopped, and treatment may only be resumed after a one-week break, starting from the beginning of the treatment schedule.
2. If unexpected side effects occur within two days after the first use, such as itching, consult your doctor before continuing with further treatments.
3. The staff must advise guests on the appropriate tanning duration, schedule, and the number of treatments that can be performed within a year, based on the nature of the UV emitters and the skin type.
4. The tanning bed must not be used if the timer is malfunctioning or if the filter is broken or missing.
5. Only users are allowed in the vicinity of the operating tanning bed. The presence of other individuals, especially children, is prohibited.
6. Pets are not allowed in the tanning cabin!

Please note:

Ultraviolet radiation from the sun and tanning equipment can cause skin and eye injuries, which may be irreversible. These biological effects depend on the type of radiation (UV-A, UV-B), its intensity, and the individual’s skin sensitivity.

Excessive UV radiation can cause sunburn. Too frequent exposure to ultraviolet radiation from the sun or tanning equipment can lead to premature skin aging and increase the risk of various types of skin cancer. The risk increases with the number of UV treatments. Exposure to radiation at a young age increases the risk of later skin damage.

If your eyes are not properly protected, excessive UV radiation can cause eye inflammation and damage to the retina. Repeated ultraviolet exposure can cause cataracts.
In the case of specific individual sensitivity or an allergic reaction to UV radiation, consult your doctor before starting treatment.

Preparations before tanning:

1. Always wear protective eyewear! Contact lenses and sunglasses do not replace protective eyewear.
2. Remove cosmetics from your skin well before tanning, and do not use tanning creams.
3. Ultraviolet radiation can worsen your health condition or enhance the side effects of certain medications. If in doubt, consult your doctor.
4. Allow at least 48 hours between two tanning sessions.
5. Do not sunbathe and use a tanning bed on the same day.
6. Follow the recommended tanning schedule (frequency, duration, breaks, number of exposures within one year, distance from UV lamps).
7. Consult a doctor if recurring growths or painful areas appear on your skin, or if your pigmented moles change.
8. Protect sensitive areas, such as scars, tattoos, and genitalia, from UV radiation.

You can find the nearest ChocoLED tanning bed by clicking on the “Studios” section on the website.

Persons who should not use tanning beds include those who:

• Are under 18 years old;
• Are prone to freckles, naturally have red hair, have abnormally discolored moles on their skin, or have 16 or more moles of 2 mm or greater in diameter on their body;
• Have atypical (irregularly shaped, greater than 5 mm in diameter, multicolored, irregularly bordered) moles. (In uncertain cases, seek medical advice!)
• Cannot tan at all, or cannot tan without getting sunburned, or suffer from sunburn;
• Burn easily in the sun or have had multiple severe sunburns in childhood;
• Have or have previously had skin cancer, or are predisposed to skin cancer;
• Have a direct relative who suffers from melanoma;
• Suffer from light-sensitive diseases or take photosensitizing medications.